Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
garymatt@optonline.net  
#1 Posted : Wednesday, December 26, 2007 1:40:45 PM(UTC)
garymatt@optonline.net

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 5

I can not get the machine tub to spin. The Motor works, I just replaced the Belt but I can not turn the Tub or the Agitator. I can not get a good grip on the pulley to try and turn it. Is there a way to test the transmission? When I had it running the cluth
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, December 26, 2007 2:04:19 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem with your washer is a bad transmission.

The transmission as long as the clutch are no longer available.

Gene.
garymatt@optonline.net  
#3 Posted : Wednesday, December 26, 2007 2:25:39 PM(UTC)
garymatt@optonline.net

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 5

Is there any way to definitly check the transmission?
Gene  
#4 Posted : Wednesday, December 26, 2007 2:39:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If you can not turn the pulley it means the transmission is locked up.

Gene.
richappy  
#5 Posted : Wednesday, December 26, 2007 2:41:03 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Shine a bright lite in the spin basket and look for something caught. Also pull the tub cover off and check for something there.
If ok, pull the belt off the tranny pulley and turn it in the spin direction. If it is locked up, you have a bad tranny. Possibly a frozen spin bearing, just check tub seal area above tranny. Post results.
garymatt@optonline.net  
#6 Posted : Wednesday, December 26, 2007 2:49:41 PM(UTC)
garymatt@optonline.net

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 5

How can I tell if the Transmission is bad or if the brake is holding the tub from spinning?
garymatt@optonline.net  
#7 Posted : Wednesday, December 26, 2007 2:54:39 PM(UTC)
garymatt@optonline.net

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 5

Also I should tell you that there is alot of oil under the machine
Gene  
#8 Posted : Wednesday, December 26, 2007 5:24:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There are no separate breaks in this washer. It's time for a new one.

Gene.
richappy  
#9 Posted : Wednesday, December 26, 2007 6:41:58 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
The brake shoes are built into the tranny, no way to tell if tranny or brakes.
garymatt@optonline.net  
#10 Posted : Thursday, December 27, 2007 8:30:56 AM(UTC)
garymatt@optonline.net

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 5

I checked what you asked and I see nothing blocking the Tub. I am on the phone with a local repair man and he is looking to see if a tranny is available
Users browsing this topic
Guest (3)
Similar Topics
Tub will not spin on spin cycle? (Washer Repair)
by Mike@castlerockis.com 2/13/2012 4:07:22 PM(UTC)
Tub Will Not Spin (Washer Repair)
by eddienlynn 5/16/2011 6:36:15 AM(UTC)
Tub will not spin (Washer Repair)
by mentorsince89 9/19/2009 8:12:43 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.