One range element not heating after oil fire - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

One range element not heating after oil fire Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: F5608W0	Brand: Roper	Age: More than 10 years
Previous Topic Next Topic

Rich777		#1 Posted : Monday, June 15, 2009 10:47:24 AM(UTC)
Rank: Member Groups: Registered Joined: 6/15/2009(UTC) Posts: 2		Hello, Last week some canola oil boiled up in a pot and spilled over onto the left rear element down under the element and ignited. The pot was pulled off the element and the fuel burnt itself out. Now the left rear element does not work. The coil itself is OK as I tried it on the right front. Could the receptacle be damaged by a fire? It is I believe it is the Whirlpool part AP3075808. thank you for your attention.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Dan O.		#2 Posted : Monday, June 15, 2009 1:39:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/31/2009(UTC) Posts: 647		Quote: Could the receptacle be damaged by a fire? Definitely. They're only made of plastic. Quote: It is I believe it is the Whirlpool part AP3075808. Yes, that looks to be the replacement element receptacle for your model: LINK > Roper F5608W0 Element Receptacle JFYI Dan O. www.Appliance411.com The Appliance Information Site =D~~~~~~


User Profile View All Posts by User View Thanks

Rich777		#3 Posted : Monday, June 15, 2009 1:51:59 PM(UTC)
Rank: Member Groups: Registered Joined: 6/15/2009(UTC) Posts: 2		Hi Dan, The plastic looks intact, Is there a fusable link inside it?


User Profile View All Posts by User View Thanks

Dan O.		#4 Posted : Monday, June 15, 2009 6:36:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/31/2009(UTC) Posts: 647		Quote: The plastic looks intact The contacts inside it are still intact and attached to the wires? The wiring between it and its switch might also need checking. Quote: Is there a fusable link inside it? No, there are no fuses for the surface elements. JFYI Dan O. www.Appliance411.com The Appliance Information Site =D~~~~~~


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close