Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replacing Defrost heater
Options
Go to last post Go to first unread
Model: 106.59092990 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
hoosierplugger1  
#1 Posted : Saturday, June 6, 2009 2:02:37 PM(UTC)
hoosierplugger1

Rank: Member

Groups: Registered
Joined: 5/27/2009(UTC)
Posts: 3
Posted on here a week ago about defrost timer being replaced and the problem (frig doesnt come out of defrost mode without a bump) comes back the next week. Have since determined that defrost heater is bad (no continuity) but cannot figure out how to get it out and install new one since it is located behind evaporator coil in freezer compartment. Any suggestions on how to get it out and the new one in?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
woodchuckie  
#2 Posted : Saturday, June 6, 2009 2:37:07 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Looking at your diagram, it looks like the heater will unplug by pulling down. It should be under and on each side of the evaporator. Part 33 here. KENMORE | Model #10659092990 | SIDE BY SIDE REFRIGERATOR | UNIT | SearsPartsDirect.com
Back to top
Users browsing this topic
Guest (2)
Similar Topics
replacing defrost heater in GE (Refrigerator & Freezer Repair)
by mickaly 12/5/2012 4:58:22 PM(UTC)
Problem with replacing defrost heater element (Refrigerator & Freezer Repair)
by jcvike 7/15/2011 9:19:32 PM(UTC)
Problem with replacing defrost heater element (Refrigerator & Freezer Repair)
by jwilhoit 3/29/2010 5:58:42 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET