Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
LG dryer won't stop tumbling
Options
Go to last post Go to first unread
Model: DLE2701V Brand: -other- Age: More than 10 years
Previous Topic Next Topic
Danimal111  
#1 Posted : Friday, March 2, 2018 9:53:47 AM(UTC)
Danimal111

Rank: Member

Groups: Registered
Joined: 3/2/2018(UTC)
Posts: 2
Hello All

I have an electric LG dryer that won't stop tumbling.

Once the drying cycle is complete the heat function stops but the dryer keeps tumbling (cold air blowing).

The machine display is all off as if the cycle is complete.

The only way to stop the tumbling is either open the door or unplug the machine. once the door is closed the tumbling continues.

Besides this the dryer works fine just want stop tumbling at the end of the cycle.

Any ideas on the issue?

Model DLE2701V

Thank you
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ThatGuy  
#2 Posted : Friday, March 2, 2018 11:00:20 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
I suspect that the motor relay on the board is stuck on. You could try gently tapping on it to see if it opens again. Probably going to need a new relay or a new board.


UserPostedImage
Back to top
Danimal111  
#3 Posted : Friday, March 2, 2018 11:05:18 AM(UTC)
Danimal111

Rank: Member

Groups: Registered
Joined: 3/2/2018(UTC)
Posts: 2
Thank you so much.

Not knowing much about electronics can you please advise which column and row the relay would be in that picture.

Also, is that control board picture a generic one or is that one specific for my model? If that is for my modl do you happen to have the part number for it?


Thank you
Back to top
brobriffin  
#4 Posted : Friday, March 2, 2018 11:15:36 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
So the machine will keep tumbling always unless you unplug it or keep the door open?
Sounds like the motor start relay on the main control board is stuck in the closed position.

If so here is the part you need.
LG EBR36858821 Pcb Assembly,main - AppliancePartsPros.com
Back to top
WWW
Guest  
#5 Posted : Thursday, April 28, 2022 8:01:30 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I have the exact issue on a DLEX2501V, can’t seem to find a circuit board
Back to top
ThatGuy  
#6 Posted : Friday, April 29, 2022 5:00:16 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
https://www.appliancepar...r36858809-ap5208735.html

EBR36858809 searched came up with this...

https://www.ebay.com/itm...b1074:g:gVMAAOSws6JhcnKv

Its a repair service. Its probably the motor relay sticking 'on'. If you could locate a new relay you could replace it yourself.
Back to top
Guest  
#7 Posted : Tuesday, July 25, 2023 5:54:35 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Guest Go to Quoted Post
I have the exact issue on a DLEX2501V, can’t seem to find a circuit board


I have the same issue, with LG dryer DLEX3850V, only a year old.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET