Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
#1 Posted : Sunday, July 18, 2021 9:36:03 AM(UTC)

Rank: Member

Groups: Registered
Joined: 5/7/2019(UTC)
Posts: 0
United States
Location: Georgia

Per the online selection guide, I ordered WP3149404 for my KERA205PSS2, but the stem is too long and the knob sticks out further than the rest. Please advise the correct part number I should order for this 6" burner control. This KitchenAid range serial number is RS3919755.


Edited by user Sunday, July 18, 2021 9:45:18 AM(UTC)  | Reason: corrected part number

See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Monday, July 19, 2021 8:07:15 AM(UTC)

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 14 time(s) in 14 post(s)
If the shaft is too long, you can shorten it. look at this picture.


See the narrow area of the shaft? You can remove the spring steel knob retainer and using two pair of pliers, snap the top off the shaft. Then reinstall the knob retainer on the lower part of the shaft.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.