Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
whirlpool duet error code FH
Options
Go to last post Go to first unread
Model: GLW9200LWO Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
ericsaraw  
#11 Posted : Wednesday, July 22, 2009 7:31:38 AM(UTC)
ericsaraw

Rank: Member

Groups: Registered
Joined: 7/21/2009(UTC)
Posts: 2
I thought you said in your previous post that the pump was OK. I'm a little confused.

Thanks, Eric
Back to top
misterfixall  
#12 Posted : Wednesday, July 22, 2009 9:12:10 AM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
all i know is that i replaced the pump+ the problem resolved itself
Back to top
carris69  
#13 Posted : Monday, August 9, 2010 4:27:34 PM(UTC)
carris69

Rank: Member

Groups: Registered
Joined: 8/9/2010(UTC)
Posts: 2
im getting the fh code and no water is going in the machine it just throws up the code after a few mins of no water ive replaced the inlet valves it didnt help ive recently replaced the pump before this problem came along do you think its the ccu im tired of spending money on this thing its only 2 yrs old
Back to top
ggdave  
#14 Posted : Wednesday, November 10, 2010 9:32:12 AM(UTC)
ggdave

Rank: Member

Groups: Registered
Joined: 9/9/2007(UTC)
Posts: 8
fh code can be caused by a dirty airtrap. small part back of tub near bottom. it is some what opaque, if it looks dirty, it probably is. can be replaced or cleaned by using vinegar or pool acid. use a plastic pail mix pool acid and water (not very much, just enough to cover part) drop in part walk away for an hour. use gloves to remove part rinse, use a bottle brush if necessary and reinstall. neutralize acid by diluting with water and adding a little baking soda before dumping into a toilet or sink. pool acid will eat metal, concrete, your skin, etc.
Airtrap has a tube that attaches it to the flow control, if it is clogged, air pressure can not be created, and it is what the sensor uses to tell the control unit if water is indeed entering machine.
this part is never mentioned in troubleshooting.
Back to top
Guest  
#15 Posted : Tuesday, June 1, 2021 3:52:32 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I have a duet ht frontload. It will get to about 12 minutes into a cycle with water in. Then it will flash an fh code and drain.
Back to top
Guest  
#16 Posted : Tuesday, June 1, 2021 3:53:51 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I have a duet ht frontload. It will get to about 12 minutes into a cycle with water in. Then it will flash an fh code and drain.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool duet error code FH (Washer Repair)
by Ben rodriguez 4/15/2013 6:15:13 PM(UTC)
whirlpool duet error code FH (Washer Repair)
by misterfixall 1/11/2009 10:36:01 AM(UTC)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET