no power to upper oven broiler ignitor - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

no power to upper oven broiler ignitor - When turning on the broiler there is no voltage to ignitor Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

Bill Patterson		#1 Posted : Tuesday, February 9, 2021 9:24:54 AM(UTC)
Rank: Member Groups: Registered Joined: 7/17/2020(UTC) Posts: 0		What causes power to go to the broiler ignitor? The oven ignitor shows 120v when selected from the oven control panel but when doing the selection for broil there is no voltage to its connector. It should show the same. Correct?
		WWW

User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ThatGuy		#2 Posted : Tuesday, February 9, 2021 8:53:37 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Yes, set on broil you should get 120 volts at the igniter connector. Check the wires all the way back to the computer board.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close