Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
BeardedSerb  
#1 Posted : Friday, January 29, 2021 6:00:24 AM(UTC)
BeardedSerb

Rank: Member

Groups: Registered
Joined: 1/29/2021(UTC)
Posts: 0

My GE profile looks to not be filling up to the heating elements. I took the water valve off and cleaned out the mesh little basket. Re tried and it still does the same thing. Before buying a new water valve, what other things that can cause this? I feel like its not going thru its whole cycle either, the lid to the detergent wont open after a while either. If it doesn't fill up will it not run its full cycle?

Thanks in Advance!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Friday, January 29, 2021 11:56:27 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Don't know much about the GE dishwashers, but you could have an intermittent water valve. they have a coil that opens its windings when it gets warm. You could have a stuck overfill switch. Its attached to a float in the dishwasher and sometimes they get stuck up. You could have a restriction in the water coming in. Pinched water line or restricted water shutoff.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.