Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
forrest318  
#1 Posted : Thursday, October 15, 2020 6:30:04 PM(UTC)
forrest318

Rank: Member

Groups: Registered
Joined: 10/15/2020(UTC)
Posts: 0

Just got my washer out of storage (5yrs). It will power up...the chimes sound normally & display lights up...then shuts right back down a second or few after I release the power button. Display will come on & can change settings IF I hold power button continually. Have tried resetting by unplugging cord & holding power then start button 5 seconds as recommended on several sites as well as holding power button x1-2 minutes per LG customer service. Nothing has worked yet to get the power to stay on.

Could it be the power button switch or relay itself not staying connected when it's released? And if so can it be repaired without replacing the entire display control board?

I have been searching online for a couple of days & have only found one other situation like this. Unfortunately it was from over 10 years ago & had no solution noted.

Thanks for any assistance anyone can give!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.