Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Hampshire82  
#1 Posted : Sunday, August 16, 2020 8:53:34 AM(UTC)
Hampshire82

Rank: Member

Groups: Registered
Joined: 8/16/2020(UTC)
Posts: 0
United States
Location: Arizona

I have a GE Dishwasher (2015-2016 new), model number GSD3300D35BB. It will start, then a few seconds later will stop. If you push the GE logo (middle of door, below latch) it will start again. I have looked to see if there is anything impeding the door closing properly. Everything seems to go in properly with nothing blocking. The latch latches fully. There are 5 button: Pots & Pans, Normal Wash, Hi Temp Wash, Heated Dry, Reset Options. Normal Wash is lit. I have tried pushing Reset Options as well as holding it in for 3 seconds. I rigged a pole to continuously press in where the GE logo is and it did a full cycle. I am thinking door/latch, something electronically is detecting a problem with the door, something else electronically or something I am not thinking of. Any help would be greatly appreciated.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.