Maytag 213054 centering springs - no longer available-suitable substitute? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Maytag 213054 centering springs - no longer available-suitable substitute? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LA612	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

Houseman		#1 Posted : Sunday, March 4, 2018 4:23:28 PM(UTC)
Rank: Member Groups: Registered Joined: 3/4/2018(UTC) Posts: 2		Hi I have a Maytag LA612 that has served me well. It has developed the problem of running out of balance on the spin cycle, to the point of walking across the floor and banging loudly. Re-leveling and distributing the wet clothes evenly in the tub has had minimal effect. Based on my internet research, it seems the recommended fix is replacing the centering springs. I figured it was worth a try, but it turns out the springs are no longer available (from any vendor I could find anyway), and the part number hasn't been superseded by another part number. The listed Maytag part number is 213054. Does anyone know of a suitable replacement part number? Any help appreciated. Thank you!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ThatGuy		#2 Posted : Sunday, March 4, 2018 8:48:16 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		What kind of shape are your damper pads in? Check out the video on the same page. I've never seen the springs get weak. Loose maybe or worn through. Whirlpool 203956 Damper Pad Kit - AppliancePartsPros.com


User Profile View All Posts by User View Thanks

Houseman		#3 Posted : Monday, March 5, 2018 6:19:15 AM(UTC)
Rank: Member Groups: Registered Joined: 3/4/2018(UTC) Posts: 2		Thanks for the info...I will take a look. I did see info during my research on what to look for (powdery material under the tub presumably from the pads wearing). To get the full look-see I assume I will need to disassemble/remove tub.


User Profile View All Posts by User View Thanks

ThatGuy		#4 Posted : Monday, March 5, 2018 12:58:00 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		I would think that if its laying on its back like they show. You could take the springs off and slide everything up a couple of inches to look underneath.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (8)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close