Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Liquid83  
#1 Posted : Monday, September 18, 2017 10:50:32 AM(UTC)
Liquid83

Rank: Member

Groups: Registered
Joined: 9/18/2017(UTC)
Posts: 3

My question is what did i mess up now? When the washer runs it goes thru the motions but after agitation it won't spin unless I physically spin it, lift the lid them close it, or turn the machine of then on again What could the problem be? Any insight is greatly appreciated.

Thanks in advance,
Meagan
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
brobriffin  
#2 Posted : Thursday, September 21, 2017 9:36:59 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
it may be the lid switch is failing.
after years of closing [slamming] the lid closed the lid switch mechanism begins to separate.
try accessing the lid switch and see if it seems to be split open. if so find some good strong zip ties and run 2 around it good and tight and replace it into the machine
Liquid83  
#3 Posted : Thursday, September 21, 2017 11:29:40 AM(UTC)
Liquid83

Rank: Member

Groups: Registered
Joined: 9/18/2017(UTC)
Posts: 3

Originally Posted by: brobriffin Go to Quoted Post
it may be the lid switch is failing.
after years of closing [slamming] the lid closed the lid switch mechanism begins to separate.
try accessing the lid switch and see if it seems to be split open. if so find some good strong zip ties and run 2 around it good and tight and replace it into the machine

Thank you so much for your reply its much appreciated
brobriffin  
#4 Posted : Thursday, September 21, 2017 2:08:12 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Let us know the outcome of your repair
brobriffin  
#5 Posted : Friday, September 22, 2017 3:06:14 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Here is a picture of how-to
I only have one zip tie at the moment so I show it in both positions.
brobriffin attached the following image(s):
20170922_184808.jpg
20170922_184632.jpg
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.