Maytag centennial washer drum sits too low Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

jansmeall		#1 Posted : Thursday, December 8, 2016 11:59:20 AM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2016(UTC) Posts: 5		I have a Maytag Centennial washer 3 yrs old that the drum appears to wobble more than normal and when I opened the lid I noticed it was sitting very low as I stood there it began to raise itself in short increments until it was back at the height it should be.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Thursday, December 8, 2016 7:20:20 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the complete model number of the washer?
User Profile View All Posts by User View Thanks

jansmeall		#3 Posted : Friday, December 9, 2016 5:10:02 AM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2016(UTC) Posts: 5		Hi Gene, I am not sure where to find the model number however I did find paperwork that contains the following number, could this be the model number? MVWC200XW It is a Maytag Centennial commercial technology washer Thanks for the reply
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Friday, December 9, 2016 11:12:29 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		In the model number you posted one or two characters are missing. The complete model number is very important. You can find the model and serial number label under the lid (on the right hand side) or on the back of the control panel.
User Profile View All Posts by User View Thanks

jansmeall		#5 Posted : Saturday, December 10, 2016 12:45:26 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2016(UTC) Posts: 5		Hi Gene, I found this number on the from right side of the label: W10338679C 09/12
User Profile View All Posts by User View Thanks

ThatGuy		#6 Posted : Saturday, December 10, 2016 2:01:41 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		He means this number "MVWC200XW" is missing at least one digit at the end of it. It could be MVWC200XW0 or MVWC200XW1 or MVWC200XW2 or MVWC200XW3. That last digit can be very, very important.
User Profile View All Posts by User View Thanks

jansmeall		#7 Posted : Saturday, December 10, 2016 2:22:01 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2016(UTC) Posts: 5		Thank you I will see if I can find it. I will have to wait for my son to come over and help me move it out to look at the back.
User Profile View All Posts by User View Thanks

jansmeall		#8 Posted : Saturday, December 10, 2016 2:28:51 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2016(UTC) Posts: 5		RESEND I found it! it ends in a 3 so complete number is MVWC200XW3
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)