Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Bruce1991  
#1 Posted : Monday, October 13, 2014 9:33:16 AM(UTC)
Bruce1991

Rank: Member

Groups: Registered
Joined: 10/13/2014(UTC)
Posts: 3

A few nights ago I had a burning smell from the dishwasher. Opened it up and can see where the control board is burnt in one spot. Also, the connector to the board is fried in one of the openings. I see that I need a new board, but I wanted to know how I could get a new connector. I've identified it as a Molex 42400-004, but how do I get one. I would rather just replace the board and connector instead of having to do a whole new harness. Thanks for your help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
gerry d  
#2 Posted : Monday, October 13, 2014 11:06:24 AM(UTC)
gerry d

Rank: Member

Groups: Registered
Joined: 7/26/2014(UTC)
Posts: 35

digikey and mouser handle all molex products
gerry d  
#3 Posted : Monday, October 13, 2014 11:17:13 AM(UTC)
gerry d

Rank: Member

Groups: Registered
Joined: 7/26/2014(UTC)
Posts: 35

Had same issue a couple months ago. I was able to resolder the pins on the control board back to the traces on the back of the board. Also was able to scrape the molex connector clean and make contact. I t still working and running a load as we speak. Here is a link to my original post when I had the issue.

http://forum.appliancepartspros...aid-washer-wont-run.html
Bruce1991  
#4 Posted : Tuesday, October 14, 2014 12:31:43 PM(UTC)
Bruce1991

Rank: Member

Groups: Registered
Joined: 10/13/2014(UTC)
Posts: 3

Gerry d, thanks for the info. I contacted Mouser and am trying to order a new connector. Hope, I can get it.
Bruce1991  
#5 Posted : Wednesday, November 12, 2014 10:46:22 AM(UTC)
Bruce1991

Rank: Member

Groups: Registered
Joined: 10/13/2014(UTC)
Posts: 3

I ended up getting a replacement connector housing and connectors and repaired the harness myself.:)
PaulAllenJ  
#6 Posted : Monday, November 21, 2016 2:09:20 PM(UTC)
PaulAllenJ

Rank: Member

Groups: Registered
Joined: 11/21/2016(UTC)
Posts: 2

Where were you able to get ahold of a connecter? Thanks
PaulAllenJ  
#7 Posted : Monday, November 21, 2016 2:21:31 PM(UTC)
PaulAllenJ

Rank: Member

Groups: Registered
Joined: 11/21/2016(UTC)
Posts: 2

Where did you find your connecter? Thanks
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.