Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
spock  
#1 Posted : Saturday, November 19, 2016 10:41:13 AM(UTC)
spock

Rank: Member

Groups: Registered
Joined: 11/19/2016(UTC)
Posts: 2

I have a kitchen aid dishwasher that does not dry the dishes after any cycle. Additionally it will not heat the water for high temperature settings. I have tested the heating element with an ohm meter and it tests ok. I have also tested the thermostat and it tests ok as well. (closed) Since kitchen aid does not supply a wiring diagram, I don't know if the next step is to replace the control board or the timer. Any help would be appreciated.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Saturday, November 19, 2016 2:32:27 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
If the parts test OK and the wiring is good all the way back to the computer/electronic control, logically its probably the bad part. W10854215

Whirlpool W10854215 Cntrl-Elec - AppliancePartsPros.com
spock  
#3 Posted : Sunday, November 20, 2016 8:48:34 AM(UTC)
spock

Rank: Member

Groups: Registered
Joined: 11/19/2016(UTC)
Posts: 2

Thanks for the reply! I located the directions for accessing the diagnostics and was able to reset the electronic / computer control. It had set an error code for a draining problem. I assume it was an isolated event so after resetting I will run the dishwasher through a cycle and see if it dries the dishes. Will update forum. Thanks again for the reply.
Users browsing this topic
Guest (2)
Similar Topics
dishwasher heater not working (Dishwasher Repair)
by Caldwell 10/25/2007 12:46:57 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.