Rank: Member
Groups: Registered
Joined: 11/18/2016(UTC)
Posts: 2
|
The ice chute door is not closing all the way causing ice build up on the inside chute of the ice maker. I replaced the solenoid, ice door assembly and spring. After replacing those it closes much better but still leaves 1/4 inch gap. Why would this be happening?! I checked the solenoid and it moves freely and there is nothing visibly blocking the door from closing. Help!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395  Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/18/2016(UTC)
Posts: 2
|
Yes the spring is in correctly
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
Without seeing it, its hard to say whats gone wrong.
Try comparing your door assembly with the parts shown at 1:38 in the video.
Maybe you could take some detailed photos and post them.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
