Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Fletch333  
#1 Posted : Tuesday, September 27, 2016 4:01:41 PM(UTC)
Quote
Fletch333

Rank: Member

Groups: Registered
Joined: 9/27/2016(UTC)
Posts: 2

I just noticed it was off.
No Power what so ever at control panel, no lights, no fan, nothing.
The last use, worked fine. A cup of coffee this morning.
The power at the receptacle is fine.
Is there an inline fuse or just the two thermal ones that I see in the parts and diagrams? I can test the capacitor and transformer once I take the unit down. Just looking for any more info on a direction to go with this unit for this type of power failure.
Thanks for any advice.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Fletch333  
#2 Posted : Sunday, October 2, 2016 4:33:28 PM(UTC)
Quote
Fletch333

Rank: Member

Groups: Registered
Joined: 9/27/2016(UTC)
Posts: 2

Update:
I found a bad solder joint on the main incoming power board, on the noise filter. Re-soldered it, works like new again. $0.00 in parts repair costs! :)
ThatGuy  
#3 Posted : Monday, October 3, 2016 4:20:16 PM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 12 time(s) in 12 post(s)
Good job!

Feels good when you fix them yourself.
moondog5814  
#4 Posted : Sunday, October 30, 2016 2:03:09 PM(UTC)
Quote
moondog5814

Rank: Member

Groups: Registered
Joined: 10/30/2016(UTC)
Posts: 3

Just had the same problem with my GE over the range microwave. No power. Outlet was good. Checked fuses....good. I have had a couple previous issues with it but that problem was that it would start buzzing and almost smell like something was burning. Had to replace the main board twice. This time though, no lights or display, nothing. After looking at it again for a couple mintes, I noticed that it had a Power Saver button on it. I never noticed it before, so I pushed it and lights and display came back on. Glad I found it because I was ready to go buy a new one. Good Luck with yours.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Samsung DV42h5200GF/A3 no power to display panel (Dryer Repair)
by jlbeyersdorf 5/10/2021 4:49:54 PM(UTC)
Icemaker fill tube has no power to heater (Refrigerator & Freezer Repair)
by ldlandell 5/4/2021 11:51:12 AM(UTC)
Jennair Fridge - No Power (Refrigerator & Freezer Repair)
by Littlechucky 4/19/2021 11:30:52 AM(UTC)
Ice Auger not working no power (Refrigerator & Freezer Repair)
by Dadtastic 3/31/2021 1:21:19 PM(UTC)
thermador double oven no power to lower (Oven Repair (including Ranges and Cooktops))
by tomstir 3/18/2021 1:36:53 PM(UTC)
no power to upper oven broiler ignitor (Oven Repair (including Ranges and Cooktops))
by Bill Patterson 2/9/2021 9:24:54 AM(UTC)
Bosch Dryer No Power (Dryer Repair)
by kaigoss 11/28/2020 6:43:09 AM(UTC)
Oven Door Locked - No Power (Oven Repair (including Ranges and Cooktops))
by Nothing Finer 10/26/2020 3:33:54 PM(UTC)
No power microwave (Microwave Repair)
by mje2019 10/9/2020 11:35:14 AM(UTC)
No power to defrost heater during forced defrost mode (Kenmore Elite) (Refrigerator & Freezer Repair)
by skssf 10/2/2020 12:37:01 PM(UTC)
Samsung Fridge no power (Refrigerator & Freezer Repair)
by dfeldman 8/24/2020 8:06:57 PM(UTC)
Kenmore Washer No Power (Washer Repair)
by CJ1833 8/20/2020 12:42:17 PM(UTC)
Kitchenaid Gas Range / Oven Panel Off - No Power (Oven Repair (including Ranges and Cooktops))
by Rsundy 8/4/2020 4:26:47 PM(UTC)
GE dishwasher - no power - no lights (Dishwasher Repair)
by milty60 4/27/2020 6:50:16 AM(UTC)
Samsung Washer no Power (Washer Repair)
by SalmanUSA 4/21/2020 8:50:15 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.