Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Gas Dryer Heating Problem
Options
Go to last post Go to first unread
Model: LGR7646EQ3 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
rinkugaya  
#1 Posted : Saturday, September 24, 2016 3:17:35 PM(UTC)
rinkugaya

Rank: Member

Groups: Registered
Joined: 9/24/2016(UTC)
Posts: 4
My Whirlpool gas dryer is having the below symptoms. Can you help me diagnose the problem:

- On heat setting "Medium (P Press)" setting. The igniter lights up good every 30-60 seconds but there is no flame.
- On heat setting "High Heavy" the igniter lights and the burner flame comes up first time for around 3-5 minutes. The dryer heats fine during this time. After this the burner goes off and does not restart. The igniter continues to light up good every 30-60 seconds.

Please guide on what part should replaced based on your best experiences to get this back to life.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ThatGuy  
#2 Posted : Saturday, September 24, 2016 4:44:21 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
I'd say you need to replace your gas valve coils. They come as a set, so replace both. They get hairline cracks in their windings that work when they are cold and open when they get warm.

Whirlpool 279834 Dryer Gas Valve Coil Kit - AppliancePartsPros.com
Back to top
rinkugaya  
#3 Posted : Sunday, September 25, 2016 4:06:28 PM(UTC)
rinkugaya

Rank: Member

Groups: Registered
Joined: 9/24/2016(UTC)
Posts: 4
Thanks. Will update the results after I replace the part
Back to top
rinkugaya  
#4 Posted : Friday, September 30, 2016 2:49:10 PM(UTC)
rinkugaya

Rank: Member

Groups: Registered
Joined: 9/24/2016(UTC)
Posts: 4
Originally Posted by: ThatGuy Go to Quoted Post
I'd say you need to replace your gas valve coils. They come as a set, so replace both. They get hairline cracks in their windings that work when they are cold and open when they get warm.

Whirlpool 279834 Dryer Gas Valve Coil Kit - AppliancePartsPros.com



One of the screws on the coil is jammed and not coming out. I tried spraying little WD40 but it is still not coming out. Any suggestions?
Back to top
ThatGuy  
#5 Posted : Monday, October 3, 2016 1:57:54 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
If you've chewed the center out of the screw, you can still cut a slot in it with a dremel tool or a hacksaw. Then use a large straight blade screwdriver to break the screw loose.

If you haven't watched the repair video on the parts page yet, it can help you with reassembly. Good luck.
Back to top
rinkugaya  
#6 Posted : Tuesday, October 4, 2016 7:04:49 AM(UTC)
rinkugaya

Rank: Member

Groups: Registered
Joined: 9/24/2016(UTC)
Posts: 4
Originally Posted by: ThatGuy Go to Quoted Post
I'd say you need to replace your gas valve coils. They come as a set, so replace both. They get hairline cracks in their windings that work when they are cold and open when they get warm.

Whirlpool 279834 Dryer Gas Valve Coil Kit - AppliancePartsPros.com


Originally Posted by: ThatGuy Go to Quoted Post
If you've chewed the center out of the screw, you can still cut a slot in it with a dremel tool or a hacksaw. Then use a large straight blade screwdriver to break the screw loose.

If you haven't watched the repair video on the parts page yet, it can help you with reassembly. Good luck.


Thanks. This worked and fixed the problem. Great forum!
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET