Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Parocket  
#1 Posted : Tuesday, December 18, 2007 4:01:12 AM(UTC)
Parocket

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 7

My tappan oven is lazy in at times and I have found it requires a tap with a rolling pin in the regulator to get it to fire.

When I set the dial I'll get a little gas smell and the ignitor lights but sometime I must slamm the door or tap the regulator. Lately its been slowing during cooking as well. Seem to be dueing the cold months but may not be the case. I had the ignitor replaced about 2 years ago and the oven is used in a normal fashion.

ignitor or regulator?

George
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kawfeeman  
#2 Posted : Tuesday, December 18, 2007 4:07:25 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

did the problem go away with the replacement of the ignitor ? ( is the oven self clean or not ? )
Parocket  
#3 Posted : Tuesday, December 18, 2007 4:13:33 AM(UTC)
Parocket

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 7

It is has a self cleaning option, the ignitor was replace a few years back but it was total loss...it just quite working all together. The current ignitor looks strong.
kawfeeman  
#4 Posted : Tuesday, December 18, 2007 4:14:32 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

nat gas or propane ?
Parocket  
#5 Posted : Tuesday, December 18, 2007 4:22:47 AM(UTC)
Parocket

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 7

Propane Gas
kawfeeman  
#6 Posted : Tuesday, December 18, 2007 4:24:12 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

top burners work ? could be moisture in the regulator...
Parocket  
#7 Posted : Tuesday, December 18, 2007 4:36:30 AM(UTC)
Parocket

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 7

top burners work fine, I was guessing something was making the regulator stick ..the bottle is just on the other side of the wall and super cold right now and then comes into a warm house.
kawfeeman  
#8 Posted : Tuesday, December 18, 2007 4:39:08 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

if the top burners work ok, it shouldnt be a regulator problem... really should check amperage of the ignitor and possibly could be the electric valve that opens up to allow gas to the bake burner ..
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.