Rank: Member
Groups: Registered
Joined: 7/14/2016(UTC) Posts: 1
|
I have replaced the thermistor and the thermostat for my dryer and still getting error code ts on the screen. I have also made sure the vents are cleared. Are there any other parts that could cause this error code except the main control board? I would appreciate any help :)
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)
|
tS = thermistor error. Check to see if the new one is showing 10K ohms at roughly 77 degrees. Try checking for that resistance from the wiring at the main control board. See your wiring chart for the connection number and wire color. It should be something like CN6. If you get a true reading there then I suspect an error in the main control board.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close