Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Mikewis777  
#1 Posted : Wednesday, February 24, 2016 5:06:57 PM(UTC)
Mikewis777

Rank: Member

Groups: Registered
Joined: 2/24/2016(UTC)
Posts: 2

I have taken apart my Maytag Quiet Series 300 to clean the filter area. Anyway.. I have done this a few times but now what is happening is the clips that hold the spray arm on the back wall have fallen off and they just wont snap in. Is there any trick to make these clips stay on the back wall and upper wall?

I tried everything I can think of to try and down and get the clip to secure to the back wall to no avail?

Any help is appreciated

Thanks
Mike
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Mikewis777  
#2 Posted : Thursday, February 25, 2016 4:36:38 PM(UTC)
Mikewis777

Rank: Member

Groups: Registered
Joined: 2/24/2016(UTC)
Posts: 2

I was able to fix this myself. I ended up using silicone to glue the clip back onto the back of the dishwasher wall. Not sure how hot a dishwasher gets during its dry cycle so I guess we shall see if it holds up.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.