Maytag Quiet Series 300 Dishwasher Backwall middle clips - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Maytag Quiet Series 300 Dishwasher Backwall middle clips Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

Mikewis777		#1 Posted : Wednesday, February 24, 2016 5:06:57 PM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2016(UTC) Posts: 2		I have taken apart my Maytag Quiet Series 300 to clean the filter area. Anyway.. I have done this a few times but now what is happening is the clips that hold the spray arm on the back wall have fallen off and they just wont snap in. Is there any trick to make these clips stay on the back wall and upper wall? I tried everything I can think of to try and down and get the clip to secure to the back wall to no avail? Any help is appreciated Thanks Mike


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Mikewis777		#2 Posted : Thursday, February 25, 2016 4:36:38 PM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2016(UTC) Posts: 2		I was able to fix this myself. I ended up using silicone to glue the clip back onto the back of the dishwasher wall. Not sure how hot a dishwasher gets during its dry cycle so I guess we shall see if it holds up.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close