Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
MichaelWillingham83  
#1 Posted : Monday, January 4, 2016 7:09:29 PM(UTC)
MichaelWillingham83

Rank: Member

Groups: Registered
Joined: 1/4/2016(UTC)
Posts: 1

I've had this Whirlpool Dishwasher for a Little over 1 yr. I noticed there was no steam coming from it and when I checked the dishwasher the water was cold and dishes were covered in soap at the end of the washing and rinsing cycle. I googled some solutions and came to the conclusion that it was the heating element. So I ordered a new one, replaced it and the dishwasher is still doing the same thing. So now I'm at a loss. Can anyone suggest a solution or should I just buy a new one. I haven't had this dishwasher long at all and already having problems out of it.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, January 5, 2016 2:26:56 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool WDF510PAYS8 / Dishwasher - AppliancePartsPros.com

See the attachment for the tech sheet.

Check the hi-limit thermostat (item 15 in section 05). It should be 0 ohms.
THIS FORUM IS DEAD!!!!!!!
mcartz  
#3 Posted : Saturday, January 9, 2016 11:32:17 AM(UTC)
mcartz

Rank: Member

Groups: Registered
Joined: 1/9/2016(UTC)
Posts: 1

I'm having the same problem as original poster, and I checked the hi-limit thermostat and it it's fine (0 ohms).

What would the next step be in troubleshooting this type of problem?
denman  
#4 Posted : Sunday, January 10, 2016 1:18:12 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
With power removed from the unit check the heater circuit (P4-3 to P4-4) at the control board. If that is OK then the control board is probably toast.

See the tech sheet in an earlier post.
THIS FORUM IS DEAD!!!!!!!
stanner  
#5 Posted : Monday, September 26, 2016 3:13:59 AM(UTC)
stanner

Rank: Member

Groups: Registered
Joined: 9/26/2016(UTC)
Posts: 1

Originally Posted by: denman Go to Quoted Post
With power removed from the unit check the heater circuit (P4-3 to P4-4) at the control board. If that is OK then the control board is probably toast.

See the tech sheet in an earlier post.


I have a Whirlpool GU2800XTVB3 Quiet Partner V and have the same problem. Is it the same circuits on this model and how do I check them?
denman  
#6 Posted : Friday, September 30, 2016 4:54:23 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sorry for not replying sooner but I am no longer active on this forum.

The circuitry will be different so it would be best that you start your own post suing POST NEW TOPIC in the dishwasher section.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Similar Topics
dishwasher won't heat water or dry (Dishwasher Repair)
by timophymax 6/19/2010 1:10:32 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.