Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
no heat control
Options
Go to last post Go to first unread
Model: 11002712100 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
biged72752  
#1 Posted : Monday, July 27, 2015 10:44:11 AM(UTC)
biged72752

Rank: Member

Groups: Registered
Joined: 7/27/2015(UTC)
Posts: 3
heat is always on. no control. the timer works and have checked out the temp. control switch. act as if the thermostat won't shut off. have replaced the on at the top of the heater vent and the fuse. sometimes the timer will time down but not shut off
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Monday, July 27, 2015 12:21:38 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Double check the model number, doesn't appear to be valid.

Eric
Back to top
biged72752  
#3 Posted : Friday, July 31, 2015 5:17:31 AM(UTC)
biged72752

Rank: Member

Groups: Registered
Joined: 7/27/2015(UTC)
Posts: 3
double checked no. it is correct, type of dryer dwsr ele 2496028 fm54. hope this will help
Back to top
fairbank56  
#4 Posted : Friday, July 31, 2015 7:44:23 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Model number does not come up at sears parts site. The 110 is a prefix and means it's made by Whirlpool, the next 5 numbers are the Sears part number. Last 3 is date code and version. Never seen a Sears part number start with a zero. Is this a Canadian model? You may have a grounded heat element but I need to see the tech sheet or wiring diagram and can't without a model number that works.

Eric
Back to top
biged72752  
#5 Posted : Friday, July 31, 2015 11:09:06 AM(UTC)
biged72752

Rank: Member

Groups: Registered
Joined: 7/27/2015(UTC)
Posts: 3
double/double checked and the # is 110 627 121 00 . It is terrible to get old and blind. Just to let you know . have replaced the thermal switch in the top of the heater. the switch in the bottom in the exhaust checks ok the heater part is 6k but can't tell if the other part even works.
Back to top
fairbank56  
#6 Posted : Friday, July 31, 2015 1:44:17 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
I would check for a grounded heat element. If it produces heat even when set to air only, that's a sure sign of a grounded element.

Eric
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Kenmore Gas dryer, no heat control (Dryer Repair)
by iowacows 8/13/2013 4:18:50 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET