Rank: Member
Groups: Registered
Joined: 5/6/2015(UTC)
Posts: 1
|
OK I noticed water leaking out of outer tub onto the Transmission area or kind of right center when looking in from the back after opening the back.
figured it was the tub seal. got the inner tube and everything removed except outer tub. is the only way to R & R the seal is to remove the motor , transmission case and all the other parts from the underside and dose it in fact sound like the tub seal. Ive check all the hoses and pump and everything else I can think of...And if you agree do you have part numbers for the seal as well as the drive hub , nut and block as well as the 6 screws.
Thanks Don
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 2/14/2011(UTC)
Posts: 816
|
Hello Bigerdady1. Yes, you have to remove the gear case to replace the seal and it does sound like the seal will need to be replaced on the unit. Part number: AP4567772
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
