Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Knocking Noise
Options
Go to last post Go to first unread
Model: LXR7244JQ0 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
fz5w1c  
#1 Posted : Friday, April 24, 2015 2:25:36 PM(UTC)
fz5w1c

Rank: Member

Groups: Registered
Joined: 4/24/2015(UTC)
Posts: 5
My Whirlpool washer just started a loud knocking noise during the agitation/washing cycle. All other cycles operate normally and with no loud knocking noises. Are there any ideas as to what I can look at to stop this noise? The washer is perfectly level and I just replaced the agitator dogs thinking that this might solve the issue, but it didn't.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Friday, April 24, 2015 5:54:45 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Post a video to youtube so we can hear it.

Eric
Back to top
fz5w1c  
#3 Posted : Saturday, April 25, 2015 4:39:24 AM(UTC)
fz5w1c

Rank: Member

Groups: Registered
Joined: 4/24/2015(UTC)
Posts: 5
Back to top
fairbank56  
#4 Posted : Saturday, April 25, 2015 4:58:01 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Back to top
fz5w1c  
#5 Posted : Saturday, April 25, 2015 12:10:35 PM(UTC)
fz5w1c

Rank: Member

Groups: Registered
Joined: 4/24/2015(UTC)
Posts: 5
Thank You Eric!! I appreciate your help.
Back to top
fz5w1c  
#6 Posted : Sunday, April 26, 2015 4:52:00 AM(UTC)
fz5w1c

Rank: Member

Groups: Registered
Joined: 4/24/2015(UTC)
Posts: 5
I have the transmission part on order and have a follow up question. I can remove the top part of the agitator no problem, but the bottom part stays in the machine. Do I need to remove the bottom part of the agitator to install the new transmission? If so, how do I remove the bottom part of the agitator?
Back to top
fairbank56  
#7 Posted : Sunday, April 26, 2015 5:02:22 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Yes, it must be removed. So, you took the agitator bolt out and the top half came off? The bottom part just fits over the splines on the agitator shaft. You should be able to pull it off. May be a little stuck.

Eric
Back to top
fz5w1c  
#8 Posted : Sunday, April 26, 2015 5:12:55 AM(UTC)
fz5w1c

Rank: Member

Groups: Registered
Joined: 4/24/2015(UTC)
Posts: 5
Yes, the top half comes off when the bolt is removed. I'll put a little extra effort in pulling the bottom part up out of the machine. Thanks!!
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET