Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
morgan6107  
#1 Posted : Friday, April 3, 2015 9:41:48 AM(UTC)
morgan6107

Rank: Member

Groups: Registered
Joined: 4/3/2015(UTC)
Posts: 2

My dryer recently began starting, running for 10-15 seconds, stopping, then repeating the process over and over. It does all of this while saying it is in the sensing mode. I had a repairman come out and tell me it was the electronic control board that needed to be replaced. I replaced it yesterday, part# W10405827, and it is still doing the same thing.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Friday, April 3, 2015 10:33:18 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Does it do this in the timed dry cycle or only in auto dry cycle?

Eric
morgan6107  
#3 Posted : Friday, April 3, 2015 10:38:35 AM(UTC)
morgan6107

Rank: Member

Groups: Registered
Joined: 4/3/2015(UTC)
Posts: 2

It does it in the timed dry cycle also.
fairbank56  
#4 Posted : Friday, April 3, 2015 11:38:27 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Then you would have to do some electrical troubleshooting to determine if your losing voltage to the motor or if the motor thermal overload is tripping. This is likely beyond your capability and a little too difficult for me to try and explain the process for you over this forum.

Eric
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.