Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Thumping Sound During Agitation
Options
Go to last post Go to first unread
Model: WPRE6150K1WT Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
AmishTech  
#1 Posted : Monday, March 23, 2015 4:13:49 AM(UTC)
AmishTech

Rank: Member

Groups: Registered
Joined: 3/12/2015(UTC)
Posts: 3
My GE Profile Washing Machine is making a loud thumping noise during agitation. see video below.

https://www.youtube.com/watch?v=T-37HSLgs2A&feature=youtu.be

I though it was bad washer dampening strap so I replaced those 4 but the issue is still present. I do see some sagging of the motor rubbing the base and that I suspect is the tension rods needing to be replaced. but I think I may have multiple problems. unless the tension rods being replaced will resolve the issue I have. Any Suggestions will be greatly appreciated.

Thank You
-Jared
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Monday, March 23, 2015 5:13:28 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Your model is one that is on the list of models prone to getting the "sagging apron" problem which causes the low parts of the suspended assembly to hit the bottom panel. There is a kit for fixing this problem. Also, looks like you have a bad mode shifter as the basket should not be moving around like that while in agitation cycle. Check the error code LED on the right side of the circuit board on top of the motor. If it flashes 4 times, pauses, then 4 times again over and over, the mode shifter is bad.

Apron kit: GE WH49X20925 Apron Conversion Kit - AppliancePartsPros.com

Eric
Back to top
AmishTech  
#3 Posted : Monday, March 23, 2015 6:04:17 AM(UTC)
AmishTech

Rank: Member

Groups: Registered
Joined: 3/12/2015(UTC)
Posts: 3
Thanks Fairbank56 - i just replaced the motherboard due to it failing is it worth repairing these 2 parts or just look in to getting a new washer? if i replace the apron that will resolve hopefully the sagging and squealing, but the thumping noise if it is the shifter. how long do you think it will last with this? im trying to way my costs being put into this.
Back to top
fairbank56  
#4 Posted : Monday, March 23, 2015 6:36:08 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
I would cut my losses but the only decent top loading washing machine left on the market is made by Speed Queen. They are top quality with a good warranty but expensive. Be prepared to spend $800-$900.

Eric
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Knocking/Thumping sound during agitation - Kenmore 110.22352511 (Washer Repair)
by bucotton 3/29/2024 12:45:08 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET