Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
rebelbob  
#1 Posted : Wednesday, February 25, 2015 3:04:54 AM(UTC)
rebelbob

Rank: Member

Groups: Registered
Joined: 2/25/2015(UTC)
Posts: 1

I have a natural GAS goodman furnace, its new and it just stopped working. the led light is continuios and still don't do nothing, but if you pull the fuse out of the circuit board then the inducer starts up and the led blinks 6 times signaling an open rollout. put the fuse back in and the led stays on steady and it wont do anything, it is very puzzling? any ideas? anyone ever see that please let me know. thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
the rookie  
#2 Posted : Sunday, March 1, 2015 4:19:19 PM(UTC)
the rookie

Rank: Member

Groups: Registered
Joined: 3/1/2015(UTC)
Posts: 4

Check airflow
RobertPat  
#3 Posted : Sunday, March 22, 2015 9:15:12 PM(UTC)
RobertPat

Rank: Member

Groups: Registered
Joined: 3/22/2015(UTC)
Posts: 1

A Furnace would be used in a better way, if and only if that has a good heating practices.
Then only there will be less possibility of getting a furnace damaged. So, to improve your heating practices and to get a better solution over it, please consult a professional heating solutions provider.
mcneil christian  
#4 Posted : Thursday, April 16, 2015 5:45:38 AM(UTC)
mcneil christian

Rank: Member

Groups: Registered
Joined: 4/10/2015(UTC)
Posts: 2

Get your furnace repaired by hiring a contractor for furnace repair mcdonough.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.