Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
13 Pages«<111213
GE washer will fill and drain but no spin/agitate
Options
Go to last post Go to first unread
Model: WCSR4170GOWW Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
zsewell75  
#121 Posted : Saturday, March 2, 2013 9:14:07 PM(UTC)
zsewell75

Rank: Member

Groups: Registered
Joined: 3/2/2013(UTC)
Posts: 2
Thanks for the reply, yeah it runs through everything like it is suppose to but during agitation nothing happens.
Back to top
fdmaatouk  
#122 Posted : Sunday, April 14, 2013 8:30:20 PM(UTC)
fdmaatouk

Rank: Member

Groups: Registered
Joined: 4/14/2013(UTC)
Posts: 2
I opened the front panel and counted the light flashing. it flashes for 6 times then stops flashing for 4 seconds then flash again for 6 seconds. what does that mean? where is the defect?

Thank you
Back to top
wseda22  
#123 Posted : Sunday, September 1, 2013 1:22:04 PM(UTC)
wseda22

Rank: Member

Groups: Registered
Joined: 9/1/2013(UTC)
Posts: 2
Hello everyone,
I have a GE Washer model # GCWN5050M0WS and I am seeing the error code of 6 flashes. I put my multimeter to the mode shifter and it read 68 ohms, open. It seems as if the motor isn't even engaging. I'm unsure if it is the motor, the mode shifter, or both.

Any suggestions on how I could further isolate the issue? Thanks.

-Willie
Back to top
fillthebarman  
#124 Posted : Tuesday, September 3, 2013 5:50:45 PM(UTC)
fillthebarman

Rank: Member

Groups: Registered
Joined: 8/17/2010(UTC)
Posts: 7
I had a customer having the exact problem on a 1 1/2 year old ge washer . We looked for fuse but none to be found. Doesn't show one on schematic. Could never get it to start after filling. My educated guess the problem is the board on the motor.
Back to top
bokersmith  
#125 Posted : Saturday, November 16, 2013 10:59:19 AM(UTC)
bokersmith

Rank: Member

Groups: Registered
Joined: 11/16/2013(UTC)
Posts: 1
i've read a couple posts with similar problems. got the top off and see a panel with a light. nothing flashing but the washer fills, clicks and keeps moving through cycle w/o agitating. the belt looks new and is firmly in place. what next? thank you
Back to top
Appliance Ninja  
#126 Posted : Saturday, November 16, 2013 11:15:14 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
The light that will be flashing is under the cover on the top of the motor. Count the number of flashes in between pauses and then post that number, please.
Back to top
deeingmire  
#127 Posted : Monday, July 7, 2014 8:35:04 AM(UTC)
deeingmire

Rank: Member

Groups: Registered
Joined: 7/7/2014(UTC)
Posts: 2
Originally Posted by: Gene Go to Quoted Post
Remove the front panel and locate the green LED on the right side on top of the motor on the inverter plate. Monitor and calculate number of flashes during a 6 seconds period. Post the result.

This is one of the last GE models and it should be good as long as you use it properly. You'll have more troubles with most of flrontloaders.

Gene.


I found the led light and it is flashing 4 times.what should I do?
Back to top
deeingmire  
#128 Posted : Monday, July 7, 2014 8:41:21 AM(UTC)
deeingmire

Rank: Member

Groups: Registered
Joined: 7/7/2014(UTC)
Posts: 2
Indicater light flashes 4 times
Back to top
rgray107918  
#129 Posted : Sunday, February 1, 2015 6:09:50 PM(UTC)
rgray107918

Rank: Member

Groups: Registered
Joined: 2/1/2015(UTC)
Posts: 1
After reading through posts, I attempted to bypass the lid switch. I must not have taped the wires well enough and they contacted the machine body, sparled, and now I have no operation at all.

Initially, I was getting 7 flashes from led, so I was going to bypass the switch, but now I need to know what I might have messed up to make all operation stop.

Are there any main fuses I should check?
Back to top
applianceman  
#130 Posted : Monday, February 2, 2015 5:28:14 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
Some models have a fuse for the motor that you may have blown. If the light that was blinking was red you don’t have a fuse. If it was green you have a fuse. If the fuse is blown the light will no longer blink. The fuse is an in-line fuse in the group of wires to the right of the tub. If the fuse isn’t bad or you don’t have a fuse my guess is your motor is bad. (This is especially true if the light no longer blinks) however the short could have also damaged the control.

This page talks about how to check the fuse HydroWave GE Washer Repair Guide
Back to top
Users browsing this topic
Guest (4)
Similar Topics
GE washer will fill and drain but no spin/agitate (Washer Repair)
by Montana_Pete 9/12/2008 6:00:02 PM(UTC)
13 Pages«<111213
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET