GE gas dryer timer will not advance on Easy Care feature - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE gas dryer timer will not advance on Easy Care feature Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GTDP490GD0WS	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

MrsG		#1 Posted : Friday, January 23, 2015 5:38:59 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2015(UTC) Posts: 6		I lost the use of the easy care timer for cottons, permanent press, delicate, etc. The dryer will run, without the timer advancing, until I stop it. The timed dry option works with no problem.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Friday, January 23, 2015 7:06:23 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Clean the moisture sensing rods in the drum. If they are gunked up or dirty, the control board will not advance the timer thinking there are still wet clothes in the drum. If this does not seem to be the problem, disconnect one of the wires from the rods. If timer still won't advance, the board is most likely the problem. Eric


User Profile View All Posts by User View Thanks

MrsG		#3 Posted : Saturday, January 24, 2015 8:40:46 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2015(UTC) Posts: 6		Thank you for your advice. I've cleaned the sensors, although since I do not use fabric softener, they were not dirty. They are bright, shiny silver and feel smooth. Nonetheless, my problem still exists. I am not mechanically inclined so do not know how to, "...disconnect one of the wires from the rods." Will you please refer me to instructions I can follow to accomplish this? Thank you.


User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Saturday, January 24, 2015 9:48:49 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		This requires either removing the front panel of the dryer and the air duct assembly, or disconnecting wires from the temperature switch. Probably just best for you to replace the control board inside the control panel. It can be returned if it doesn't fix the problem. You might first try removing the board and cleaning the contacts on the back of the board where the wiring connector plugs in, with a pencil eraser until clean and shiny. GE WE04X10103 Pc Board-No Buzzer - AppliancePartsPros.com Eric


User Profile View All Posts by User View Thanks

MrsG		#5 Posted : Friday, February 6, 2015 10:54:08 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2015(UTC) Posts: 6		Originally Posted by: fairbank56 This requires either removing the front panel of the dryer and the air duct assembly, or disconnecting wires from the temperature switch. Probably just best for you to replace the control board inside the control panel. It can be returned if it doesn't fix the problem. You might first try removing the board and cleaning the contacts on the back of the board where the wiring connector plugs in, with a pencil eraser until clean and shiny. GE WE04X10103 Pc Board-No Buzzer - AppliancePartsPros.com Eric The control panel was delivered and installed this morning. PROBLEM SOLVED. :) Thank you, Eric and Appliance Parts Pro.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close