Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Lnasehi  
#1 Posted : Saturday, January 10, 2015 6:23:01 AM(UTC)
Lnasehi

Rank: Member

Groups: Registered
Joined: 1/10/2015(UTC)
Posts: 2

Washer goes through all cycles properly EXCEPT the water never shuts off following the rinse cycle. It keeps running even after the machine if off and power turned off. If we stop it after rinse cycle, turn off the water to the machine and then turn it back on a spin only cycle, it will spin and drain properly. The we turn the water back on and repeat the process for the next load. What is the problem?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Sunday, January 11, 2015 2:12:00 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Sounds like the valve assembly may be sticking in the open position. Try changing it out and see if that doesn't fix things.
Lnasehi  
#3 Posted : Monday, January 12, 2015 3:34:05 AM(UTC)
Lnasehi

Rank: Member

Groups: Registered
Joined: 1/10/2015(UTC)
Posts: 2

We are considering that but it seems unlikely in that the water does come on and off properly during the wash cycles - so we are thinking its a problem with "the brain" of the washer. Where is the computer chip or sensor that controls that? It's only the cold water.
sidfink43  
#4 Posted : Monday, January 12, 2015 4:02:12 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Okay, I didn't understand that, thought you were using hot water in the wash cycle and the cold water happened. But if water is coming in after power has been cut to the machine then the valve is stuck in the open position, so it is somewhat of a mystery as to why it would work on the wash cycle.

Anyway I would start with the valve assembly as it is a less expensive part, and if that does not fix things try changing out the main control unit. Clicking on your model number will take you to an exploded view of your machine to find the part you need. And if you buy from this site and the part does not fix things you can return it.
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.