GE Dishwasher won't drain all way - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE Dishwasher won't drain all way Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLD5850L15CS	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

AnthonyJS02		#1 Posted : Saturday, January 10, 2015 9:12:07 AM(UTC)
Rank: Member Groups: Registered Joined: 1/10/2015(UTC) Posts: 2		Hello all stumbled upon this website while trying to figure out why my dishwasher won't drain all way. I have checked drain hose to garbage disposal and have used shop vac to end of hose and sucked out any debris. I have disassembled the sprayer, lock cap(broke the locking tabs) took off filter, unlocked upper sprayer arm and only found little mush in back drain. But still no luck. What would be next step? Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Sunday, January 11, 2015 1:19:46 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for GE GLD5850L15CS Dishwasher - AppliancePartsPros.com You could undo the drain hose at the disposal and get it to drain onto a pail. Hold the hose securely in the pail and put a towel etc. over it to stop water splashing all over. This will eleiminate the drain as a possible cause. If it is still a problem. You will have to work your way back from the main pump to be sure the drain is clear. Pay special attention to the flapper valves (items 328 in section 05). Probably i is best to pull the dishwasher out from the cabinet. Also check the sump fo any sign of rot. They can develop a crumbly coating on the inside which is the rubber breaking down. If there is any replace the sump as it is a leak waiting to happen.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

AnthonyJS02		#3 Posted : Sunday, January 11, 2015 4:25:19 AM(UTC)
Rank: Member Groups: Registered Joined: 1/10/2015(UTC) Posts: 2		Thanks for response. Is it pretty easy task pulling the dishwasher out?


User Profile View All Posts by User View Thanks

denman		#4 Posted : Sunday, January 11, 2015 10:25:43 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Depends how it was installed. Go to the GE appliance website you should be able to find the install sheet.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close