Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
CMANN1  
#1 Posted : Thursday, August 28, 2014 6:08:58 PM(UTC)
CMANN1

Rank: Member

Groups: Registered
Joined: 8/28/2014(UTC)
Posts: 2

Hi My name is Corey and this is my first post here,

Long story short, I bought a forclosure home and this oven was included and very clean so I would like to use it but I am having issues with the oven staying lit.

From the START this is what the sypthoms have been and work thats been done:

1.When "Preheating" oven Ignitor would glow, gas would light, and oven would start heating up. It would only stay lit for aprox 4-5 minutes then would go out with ignitor still glowing for a bit before it stopped glowing as well. The display would still read "Pre" as if is was still pre-heating. It seems to only heat up to 250 degrees F

2. I replaced the Ignitor with a new unit-----No Change

3. I replaced the Temp Probe with a new unit----No Change

The top 5 burners have no issues with staying on and the only other issue is that the lower RH burner doesn't ignite on its own but once lit it will stay on.

I am at a loss and need the oven to work. I do not have the funds for a whole new unit so if anyone has any ideas or suggestions I would be very greatful!

Thank you for taking the time to read.

Brand - Tappan
Model # TGF657BFW5
Age - 12yrs
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
JerryCaldwell  
#2 Posted : Thursday, December 18, 2014 12:49:01 PM(UTC)
JerryCaldwell

Rank: Member

Groups: Registered
Joined: 4/20/2010(UTC)
Posts: 16

I am having similar experience to what you describe. Were you able to solve the problem?

Like you I have replaced thermostat and ignitor, oven will not light.

thank you!!
CMANN1  
#3 Posted : Thursday, December 18, 2014 1:00:06 PM(UTC)
CMANN1

Rank: Member

Groups: Registered
Joined: 8/28/2014(UTC)
Posts: 2

Have not found a solution. We just do not use the preheat function. We use the bake function and it takes a long time to warm up. Good luck
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.