Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool W102218431
Options
Go to last post Go to first unread
Model: W102218431 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
zombie242  
#1 Posted : Wednesday, October 15, 2014 5:09:08 PM(UTC)
zombie242

Rank: Member

Groups: Registered
Joined: 10/15/2014(UTC)
Posts: 2
Hello
My oven is glass top electric. My display will only turn on if my oven burner knobs are turned on? I cannot get anything to work but just a few weeks ago it did this very same thing but everything would work as long as I turned the knob on. Any help would be appreciated
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Thursday, October 16, 2014 2:22:42 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find any info on the given model number.
Please check it.
Find your model number - AppliancePartsPros.com

Sounds like a power problem.

Perhaps you have lost half the line voltage (L1 usually).
Then when you turn on a stove top element L2 voltage feed through the control and it then powers the control board.

Try flipping the breaker off/on slowly a couple times. Sometimes you can loose half the line without actually tripping the breaker.
Check the voltage at the plug
L1 to L2 should be 240 volts
L1 to Neutral and L2 to Neutral, both should be 120 volts.
If OK
Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out
If OK
Check the power at the terminal strip.
[COLOR="Red"]Be careful as 240 volts is lethal !!![/COLOR]
THIS FORUM IS DEAD!!!!!!!
Back to top
zombie242  
#3 Posted : Monday, October 20, 2014 12:39:44 PM(UTC)
zombie242

Rank: Member

Groups: Registered
Joined: 10/15/2014(UTC)
Posts: 2
Thank you so much you were SPOT on! Ended up being a Burned out circuit breaker. $18 from menards and you saved me a 150 dollar service call. Honestly I appreciate the help:)
Back to top
denman  
#4 Posted : Monday, October 20, 2014 11:56:49 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You are welcome.

And thanks for getting back to us. Now when others search for a similar problem they will see what actually worked instead of just suggestions about what could be the cause.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET