Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
aguywithfeet  
#1 Posted : Thursday, September 11, 2014 5:10:15 PM(UTC)
aguywithfeet

Rank: Member

Groups: Registered
Joined: 9/11/2014(UTC)
Posts: 2

My dishwasher lower spray arm spins about 12 times a minute and the water jet does not reach the top of the dishwasher. Could this be why it's not cleaning well? I cleaned the filters abd checked all the jets, it had over an inch of water in the bottom. What else could be the problem?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
aguywithfeet  
#2 Posted : Friday, September 12, 2014 4:18:03 AM(UTC)
aguywithfeet

Rank: Member

Groups: Registered
Joined: 9/11/2014(UTC)
Posts: 2

I think the top section of my telescoping tube that shoots up is missing. I only have two. This would explain my issue right? Seems to make sense.
denman  
#3 Posted : Friday, September 12, 2014 5:31:36 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for GSD3300 - AppliancePartsPros.com
Your model number is missing a couple digits so you will have to choose the correct unit from the Matching Model Numbers section.
You can then take a look at what the arm should look like.

[COLOR="Blue"]This would explain my issue right?[/COLOR]
Yes it would, if indeed there should be 3 sections.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Similar Topics
Dryer stops and starts during entire drying cycle, is this normal? (Dryer Repair)
by loric228 1/3/2009 4:36:20 AM(UTC)
I can hear water behind the drum is this normal? (Washer Repair)
by repowoman 10/6/2007 11:58:33 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.