Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
reggieh  
#1 Posted : Sunday, August 24, 2014 5:56:45 PM(UTC)
reggieh

Rank: Member

Groups: Registered
Joined: 8/24/2014(UTC)
Posts: 3

I have an issue with water freezing from the back of the Maytag refrigerator/freezer to the ice maker in that water shoot/tube. I would simply pull the tube out and clear the ice from it and reinstall. It would happen only once in a while, but now it has become a weekly nuisance. Sometimes I would have to pull out the ice maker and clear the ice buildup too in the water entry part.

Do I need to replace my whole ice maker, water inlet valve or something else?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, August 26, 2014 2:25:17 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag MZD2665HEW Refrigerator - AppliancePartsPros.com

First I would check the freezer temperature perhaps it is just too cold.
It should be between 0 and 5 degrees F.

Next most likely culprit is the water valve.
It could be that it is not closing properly so after it is supposed to close you get a couple extra drops. These freeze in the tube and eventually build up till the tube plugs.
THIS FORUM IS DEAD!!!!!!!
reggieh  
#3 Posted : Tuesday, August 26, 2014 9:01:02 AM(UTC)
reggieh

Rank: Member

Groups: Registered
Joined: 8/24/2014(UTC)
Posts: 3

Thank you for the reply. I ordered the part and will see if that resolves the issue.
reggieh  
#4 Posted : Thursday, September 11, 2014 11:31:27 AM(UTC)
reggieh

Rank: Member

Groups: Registered
Joined: 8/24/2014(UTC)
Posts: 3

Update. The new part did solve the problem. Thank you for your help!
denman  
#5 Posted : Friday, September 12, 2014 1:02:34 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You are welcome.

And thanks for getting back to us. Now when others search for a similar problem they will see what actually worked instead of just suggestions about what could be the cause.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.