AppliancePartsPros.com
»
Appliance Repair Help
»
Refrigerator & Freezer Repair
»
Hotpoint Frig not cooling, already replaced mainboard, heater and thermostat
Rank: Member
Groups: Registered
Joined: 6/22/2013(UTC) Posts: 4
|
As the title suggests, I have already replaced the control board, heater and thermostat. I will say that the control board was a little different as the replacement (p/n WR55X10942) had places for 2 additional pin connections, but via my google research it seemed like it was the right replacement (I assume rev changes).
I also bought the main board new off of ********, so I guess there is a chance that it is just not working.
My freezer coils are still freezing up which in-turn keeps my frig from cooling.
Any other ideas before I trash this frig?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Locate the 3 pin, gray power connector on the motherboard. Unplug it and stick a wire jumper between the mating pins as labeld on the motherboard line and def. If fridg now defrosts, I would try new evaporator and freezer thermistors.
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Refrigerator & Freezer Repair
»
Hotpoint Frig not cooling, already replaced mainboard, heater and thermostat
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close