Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Where connect the 2 wires to the 4 connections on sensor bar
Options
Go to last post Go to first unread
Model: MDE9606AZW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
D W M  
#1 Posted : Tuesday, August 19, 2014 7:43:07 AM(UTC)
D W M

Rank: Member

Groups: Registered
Joined: 8/19/2014(UTC)
Posts: 2
inside back wall of the dryer. As the clothes dry in automatic that sensor adjust the time accordingly. Check to make sure that those strips are clean and that there is no "debri" on them. If they are clean then you are probably into a thermostat.


Yes but the picture you show is not the sensor bar
I,m looking for the wire connections points

There are 4 on sensor 2 on each side, 4 in total

I need to know where the 2 connections (blue and green)

Model MDE9606AZW Maytag drier
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, August 23, 2014 1:35:58 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts includes a wiring diagram.
Parts for Maytag MDE9606AZW Dryer - AppliancePartsPros.com

I cannot see the 4 connectors at the sensor looking at the part's picture but it should not matter.
One wire goes to one of the metal strips and the other wire goes to the other strip.
It does not matter which wire goes to which strip.
THIS FORUM IS DEAD!!!!!!!
Back to top
fairbank56  
#3 Posted : Saturday, August 23, 2014 4:09:13 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Back to top
denman  
#4 Posted : Saturday, August 23, 2014 4:19:00 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sorry fairbank56

I did not notice that he had duplicate posts
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Where connect the 2 wires to the 4 connections on sensor bar (Dryer Repair)
by D W M 8/19/2014 7:37:31 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET