Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
SGTEJF53  
#1 Posted : Thursday, August 2, 2007 1:37:36 PM(UTC)
Quote
SGTEJF53

Rank: Member

Groups: Registered
Joined: 8/2/2007(UTC)
Posts: 2

Hi, My Problem Is That My Freezer Is Not Cold Enough. A Thermometer Inside Shows A Temp Between 18-20 Degree's Farenheight. Some Things Like Bread And The Like Are Semi-soft. The Thermostat Is Turned Up To Maximum. Any Suggestions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jdman  
#2 Posted : Friday, August 3, 2007 9:58:35 AM(UTC)
Quote
jdman

Rank: Member

Groups: Registered
Joined: 7/27/2007(UTC)
Posts: 53

Should be reading-5 to+5. Clean coils and fan ant back bottom of unit very weel. If these are dirty, it is difficuilt for it to remove heat. Could also be a slow running evaporator fan motor or bad cold control. Are you sure the temp is turn up all the way or did you turn the dial up for the damper that sends cool air to ref side? Just asking because I have hade many calls in the past where this was the case.
SGTEJF53  
#3 Posted : Friday, August 3, 2007 10:55:14 AM(UTC)
Quote
SGTEJF53

Rank: Member

Groups: Registered
Joined: 8/2/2007(UTC)
Posts: 2

Thanks Jdman For Responding. The Answer Is That The Freezer In Question Is An Upright Freezer With No Refrigerator. I Looked Underneath And It Looks Pretty Clean In There. The Thermostat Is Turned Up To 5, The Highest It Will Go. The Model Number Is Kenmore # 253.9284011. Thanks Ed
jdman  
#4 Posted : Friday, August 3, 2007 10:58:54 AM(UTC)
Quote
jdman

Rank: Member

Groups: Registered
Joined: 7/27/2007(UTC)
Posts: 53

Sorry. Could be low on refrigerant. Does the compressor run continously? Also could be the cold control.
mazzov  
#5 Posted : Saturday, August 4, 2007 5:06:26 AM(UTC)
Quote
mazzov

Rank: Member

Groups: Registered
Joined: 7/28/2007(UTC)
Posts: 2

I've got the same problem. Same model type. Except it is speratic. It will work fine for a few days then I notice there is water on the floor and everything is on the soft side but it's still blowing cool air.

What did you wind up doing.
lamallamo  
#6 Posted : Saturday, April 26, 2008 7:47:47 PM(UTC)
Quote
lamallamo

Rank: Member

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 5

Yes, I just vaccumed a lot of dust out of bottom and cleaned and it is still not cold (refrigerator) Freezer is making ice but smal pieces
lamallamo  
#7 Posted : Saturday, April 26, 2008 7:50:33 PM(UTC)
Quote
lamallamo

Rank: Member

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 5

Ice maker if making ice but the temperature in the refrigerator and freezer not cold enough. Some things in freezer also melting
lamallamo  
#8 Posted : Saturday, April 26, 2008 7:51:09 PM(UTC)
Quote
lamallamo

Rank: Member

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 5

Yes water is getting to ice maker
lamallamo  
#9 Posted : Saturday, April 26, 2008 7:52:40 PM(UTC)
Quote
lamallamo

Rank: Member

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 5

what could be the problem, freeon or what?
lamallamo  
#10 Posted : Saturday, April 26, 2008 7:56:09 PM(UTC)
Quote
lamallamo

Rank: Member

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 5

Originally Posted by: lamallamo Go to Quoted Post
what could be the problem, freeon or what?

I am afraid that the refrigerator is not cold enough and I will get sick from eating the food. The Freezer is cold but not keeping, for example, ice cream solid. It turns to mush
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.