Kenmore Fdreezer Not Cold Enough Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

SGTEJF53		#1 Posted : Thursday, August 2, 2007 1:37:36 PM(UTC)
Rank: Member Groups: Registered Joined: 8/2/2007(UTC) Posts: 2		Hi, My Problem Is That My Freezer Is Not Cold Enough. A Thermometer Inside Shows A Temp Between 18-20 Degree's Farenheight. Some Things Like Bread And The Like Are Semi-soft. The Thermostat Is Turned Up To Maximum. Any Suggestions?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

jdman		#2 Posted : Friday, August 3, 2007 9:58:35 AM(UTC)
Rank: Member Groups: Registered Joined: 7/27/2007(UTC) Posts: 53		Should be reading-5 to+5. Clean coils and fan ant back bottom of unit very weel. If these are dirty, it is difficuilt for it to remove heat. Could also be a slow running evaporator fan motor or bad cold control. Are you sure the temp is turn up all the way or did you turn the dial up for the damper that sends cool air to ref side? Just asking because I have hade many calls in the past where this was the case.
User Profile View All Posts by User View Thanks

SGTEJF53		#3 Posted : Friday, August 3, 2007 10:55:14 AM(UTC)
Rank: Member Groups: Registered Joined: 8/2/2007(UTC) Posts: 2		Thanks Jdman For Responding. The Answer Is That The Freezer In Question Is An Upright Freezer With No Refrigerator. I Looked Underneath And It Looks Pretty Clean In There. The Thermostat Is Turned Up To 5, The Highest It Will Go. The Model Number Is Kenmore # 253.9284011. Thanks Ed
User Profile View All Posts by User View Thanks

jdman		#4 Posted : Friday, August 3, 2007 10:58:54 AM(UTC)
Rank: Member Groups: Registered Joined: 7/27/2007(UTC) Posts: 53		Sorry. Could be low on refrigerant. Does the compressor run continously? Also could be the cold control.
User Profile View All Posts by User View Thanks

mazzov		#5 Posted : Saturday, August 4, 2007 5:06:26 AM(UTC)
Rank: Member Groups: Registered Joined: 7/28/2007(UTC) Posts: 2		I've got the same problem. Same model type. Except it is speratic. It will work fine for a few days then I notice there is water on the floor and everything is on the soft side but it's still blowing cool air. What did you wind up doing.
User Profile View All Posts by User View Thanks

lamallamo		#6 Posted : Saturday, April 26, 2008 7:47:47 PM(UTC)
Rank: Member Groups: Registered Joined: 4/26/2008(UTC) Posts: 5		Yes, I just vaccumed a lot of dust out of bottom and cleaned and it is still not cold (refrigerator) Freezer is making ice but smal pieces
User Profile View All Posts by User View Thanks

lamallamo		#7 Posted : Saturday, April 26, 2008 7:50:33 PM(UTC)
Rank: Member Groups: Registered Joined: 4/26/2008(UTC) Posts: 5		Ice maker if making ice but the temperature in the refrigerator and freezer not cold enough. Some things in freezer also melting
User Profile View All Posts by User View Thanks

lamallamo		#8 Posted : Saturday, April 26, 2008 7:51:09 PM(UTC)
Rank: Member Groups: Registered Joined: 4/26/2008(UTC) Posts: 5		Yes water is getting to ice maker
User Profile View All Posts by User View Thanks

lamallamo		#9 Posted : Saturday, April 26, 2008 7:52:40 PM(UTC)
Rank: Member Groups: Registered Joined: 4/26/2008(UTC) Posts: 5		what could be the problem, freeon or what?
User Profile View All Posts by User View Thanks

lamallamo		#10 Posted : Saturday, April 26, 2008 7:56:09 PM(UTC)
Rank: Member Groups: Registered Joined: 4/26/2008(UTC) Posts: 5		Originally Posted by: lamallamo what could be the problem, freeon or what? I am afraid that the refrigerator is not cold enough and I will get sick from eating the food. The Freezer is cold but not keeping, for example, ice cream solid. It turns to mush
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)