Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No power to cold water solenoid of inlet valve
Options
Go to last post Go to first unread
Model: WJSR2080T2AA Brand: GE Age: More than 10 years
Previous Topic Next Topic
juddgrossman  
#1 Posted : Monday, June 23, 2014 12:47:54 PM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
No cold water entering the drums. There is water to the inlet valve. When I move the hot water wires to the cold water solenoid the solenoid works, so inlet valve seems o.k.. What is my next trouble shooting step?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Monday, June 23, 2014 3:02:46 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
May be faulty temp switch. Unplug washer, unplug wires from terminals 1 and 3 on back of temp switch. With switch set to cold/cold, you should have continuity between terminal 1 and 3. If not or you read high resistance, replace switch. Part number is WH12X999. When I look up this part number on APP, it gives replacement part WH12X10498 and the photo's show a switch with only 4 terminals. Your switch should have 5 terminals.

Eric
Back to top
juddgrossman  
#3 Posted : Tuesday, June 24, 2014 7:10:08 PM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
No continuity between 1 and 3. I ordered a new WH12X999. Thanks!
Back to top
juddgrossman  
#4 Posted : Monday, June 30, 2014 9:08:10 AM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
The new WH12X999 just came and it only has 4 terminals. Can I make it work?
Back to top
fairbank56  
#5 Posted : Monday, June 30, 2014 9:48:05 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Should work ok. After looking at the wiring diagram and timer chart again, I see no function whatsoever for the blue wire at terminal 5. Weird. Is your original switch a 3 position switch or 4?

Eric
Back to top
juddgrossman  
#6 Posted : Monday, June 30, 2014 12:55:41 PM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
I installed the 4 terminal switch. Seems to work o.k.
Back to top
juddgrossman  
#7 Posted : Monday, June 30, 2014 12:58:13 PM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
Original is a three position switch: cold/cold, warm/cold, hot/cold. The original switch had 5 terminals. New one has 4 terminals, so now blue wire goes nowhere. Seems to work fine with the 4 terminal switch.
Back to top
fairbank56  
#8 Posted : Monday, June 30, 2014 1:18:10 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Some of these older models had a 4 position temp switch that included a warm/warm setting (warm rinse). Terminal 5 and the blue wire were to provide for the warm rinse. Still doesn't make sense though that there is a 5 terminal switch with only 3 positions and no function of terminal 5 and blue wire. Anyway, your back in business.

Eric
Back to top
juddgrossman  
#9 Posted : Monday, June 30, 2014 3:56:20 PM(UTC)
juddgrossman

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 8
Yup. Thanks for your help!
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET