Removal of GE Hydrowave washer agitator - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Removal of GE Hydrowave washer agitator Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

Dave Storck		#1 Posted : Sunday, March 30, 2014 11:18:01 AM(UTC)
Rank: Member Groups: Registered Joined: 3/27/2014(UTC) Posts: 4		Newer GE Hydrowave washer with stainless steel tub. Can't get the agitator out. How is it done?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Sunday, March 30, 2014 1:46:47 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Model number???


User Profile View All Posts by User View Thanks

Dave Storck		#3 Posted : Monday, March 31, 2014 8:20:06 AM(UTC)
Rank: Member Groups: Registered Joined: 3/27/2014(UTC) Posts: 4		Wjre5550hww


User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Monday, March 31, 2014 1:05:41 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Place a strap under agitator and yank forcefully straight up and it should pop off the agitator coupler. Eric


User Profile View All Posts by User View Thanks

Dave Storck		#5 Posted : Tuesday, April 1, 2014 8:37:30 AM(UTC)
Rank: Member Groups: Registered Joined: 3/27/2014(UTC) Posts: 4		Thanks Eric. I have tried this procedure before and I couldn't get it loose. The unit was serviced before by a GE tech, and he may have forced the agitator onto the coupling. The important thing that you have cleared up for me is the fact that it is not fastened from the bottom. Worst case is that I have to cut the agitator to remove it. I must get it out in order to pursue noise in the high spin mode. The help you have offered is very much appreciated! With best regards, Dave Storck drstorck@verizon.net


User Profile View All Posts by User View Thanks

Dave Storck		#6 Posted : Tuesday, April 1, 2014 8:38:08 AM(UTC)
Rank: Member Groups: Registered Joined: 3/27/2014(UTC) Posts: 4		Thanks Eric. I have tried this procedure before and I couldn't get it loose. The unit was serviced before by a GE tech, and he may have forced the agitator onto the coupling. The important thing that you have cleared up for me is the fact that it is not fastened from the bottom. Worst case is that I have to cut the agitator to remove it. I must get it out in order to pursue noise in the high spin mode. The help you have offered is very much appreciated! With best regards, Dave Storck drstorck@verizon.net 215.407.7302


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close