Dishwasher not drying - high-limit/temp thermostat or heating element? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Dishwasher not drying - high-limit/temp thermostat or heating element? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU920QWDQ3	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

tom_in_atl		#1 Posted : Monday, January 20, 2014 7:44:08 AM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2014(UTC) Posts: 2		Everything else seems to be working fine but the dishes are not drying. From what I've read, it may either be the high-limit/temp thermostat or the heating element. Are the high-limit thermostat and high-temp thermostat the same thing? Some sites seem to have the same item with different names. How can I confirm which is the issue? thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

tom_in_atl		#2 Posted : Monday, January 20, 2014 6:45:34 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2014(UTC) Posts: 2		I removed and tested the heating element as well as the hi-limit thermostat #661566 Both tested fine for continuity. I also tested the thermostat by placing it on a griddle.. when it heated up to about 240 degrees, the circuit opened so it seems to be working as well. What else could be the problem? thanks


User Profile View All Posts by User View Thanks

denman		#3 Posted : Thursday, January 23, 2014 1:37:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for Whirlpool DU920QWDQ3 Dishwasher - AppliancePartsPros.com See the attachment for the tech sheet. Using a meter check from P6 (White/Red) on the control board to White/Violet on the door switch. If you measure the heater resistance ( about 25 ohms) then odds are that it is a control board problem. File Attachment(s): DU920.pdf (651kb) downloaded 5 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close