Rank: Member
Groups: Registered
Joined: 11/7/2011(UTC)
Posts: 6
|
Dryer wont start. When you push start button the end of cycle buzzer goes off. Changed timer motor control yesterday still still does same thing. Any ideas
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Check for 120vac to ground at timer Y-BK terminal and at GY terminal, timer on, don't have to press start switch.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/7/2011(UTC)
Posts: 6
|
Checked for voltage you suggested have 120 at each. Thinking the motor has gone bad or the contactor switch on the motor bad ???
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
I'm not convinced of that yet. Turn timer on to timed dry, monitor 120vac at gray wire on buzzer. Press start switch. Does buzzer sound? Does voltage drop? While holding start button in and buzzer is sounding, also check voltage at pink wire on buzzer.
Eric
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
