door lock testing - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

door lock testing Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LTE2940ES0	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

mr c		#1 Posted : Saturday, January 11, 2014 10:09:01 PM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2014(UTC) Posts: 2		Washer gives e47 code in diagnostic mode. Pulled door latch assy. and tested ptc terminals and it checked about 3k ohms. Is this ok? Or should it be closer to 1500 ohms. If it is ok what should I check next.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Sunday, January 12, 2014 3:37:48 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		I cannot find any info on the given model number tried here and the Frigidaire site. Also if I Google it all that came up was your post. Please check it. Note that if this is not a North American unit info may not be available.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

mr c		#3 Posted : Sunday, January 12, 2014 7:12:07 AM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2014(UTC) Posts: 2		Do new lock assy. ptc resistance measuer 1500 ohms or more.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close