Freezer is Fine Fridge isnt cold - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Freezer is Fine Fridge isnt cold Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KSRB25FKSS02	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

chevzilla		#1 Posted : Thursday, December 12, 2013 8:18:09 PM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2013(UTC) Posts: 3		OK...So I have been working on this problem since right before Thanksgiving. My fridge wont get below 45F. I found that the previous owner had zip tied the defusser in the open position before we got the fridge. I replaced the defusser thinking that would cure the problem but to no avail. So tonite I replaced the fridge side thermostat and the new defusser wont open. Im just wondering if anyone may have an idea as to what to do next? The freezer is going below zero. I tried closing the door switch also and no change other than the lights going off.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Friday, December 13, 2013 2:51:29 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		See the attachment for the tech sheet. It has a baffle test procedure. File Attachment(s): KSRB25.pdf (608kb) downloaded 5 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

chevzilla		#3 Posted : Saturday, December 14, 2013 3:03:53 PM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2013(UTC) Posts: 3		So first let me say thanks for the paperwork. So I tested all the new items and they seem to be up to par. I have noticed the the defusser wont open... I can slide the vane open but it does close by itself and wont reopen. Is the defusser not working properly? Is there a signal from another piece that is supposed to cause it to open?


User Profile View All Posts by User View Thanks

denman		#4 Posted : Sunday, December 15, 2013 4:13:11 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Did you try the baffle test given in the tech sheet?
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

chevzilla		#5 Posted : Sunday, December 15, 2013 11:13:00 AM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2013(UTC) Posts: 3		I tried the test and the defusser was acting sluggish. It closed but didnt reopen


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close