Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Flashing 12:00
Options
Go to last post Go to first unread
Model: WFG361LVQ2 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
Sarah Gifford  
#1 Posted : Tuesday, November 19, 2013 6:49:09 AM(UTC)
Sarah Gifford

Rank: Member

Groups: Registered
Joined: 11/13/2013(UTC)
Posts: 7
I talked to someone the other day and i was told to turn the breaker off for 5 min. The oven did come back on I used it a few times during the day then after the night when I got up it was flashing 12:00 again. So, I turn the breaker again for 5 min and it worked but then it went back to flashing 12:00 again. Have idea what it could be?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Appliance Ninja  
#2 Posted : Tuesday, November 19, 2013 6:52:34 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
The flashing of 12:00 indicates that the control lost power at some point. I would start by looking at the cord connections to make sure they are tight and not burnt or melted (see picture below). That is pretty common and can cause the issues you are having. If all of the connections are tight and no issues are apparent, you may have a faulty control. Are all of the functions working but it just jeeps resetting?
Appliance Ninja attached the following image(s):
Dryer cord burnt.jpg
Back to top
Sarah Gifford  
#3 Posted : Tuesday, November 19, 2013 6:55:33 AM(UTC)
Sarah Gifford

Rank: Member

Groups: Registered
Joined: 11/13/2013(UTC)
Posts: 7
Originally Posted by: Appliance Ninja Go to Quoted Post
The flashing of 12:00 indicates that the control lost power at some point. I would start by looking at the cord connections to make sure they are tight and not burnt or melted (see picture below). That is pretty common and can cause the issues you are having. If all of the connections are tight and no issues are apparent, you may have a faulty control. Are all of the functions working but it just jeeps resetting?



Yes everything works when it comes back on I can set the clock and cook on it I even turned it off and came back to cook something later that day.
Back to top
Appliance Ninja  
#4 Posted : Tuesday, November 19, 2013 7:00:27 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
I would look very carefully at the cord connections and if they look good, perhaps the outlet connections. It could be an issue with an intermittent control board, but it is most likely a power supply connection problem. Let me know what you find.
Back to top
Sarah Gifford  
#5 Posted : Tuesday, November 19, 2013 7:02:03 AM(UTC)
Sarah Gifford

Rank: Member

Groups: Registered
Joined: 11/13/2013(UTC)
Posts: 7
Originally Posted by: Appliance Ninja Go to Quoted Post
I would look very carefully at the cord connections and if they look good, perhaps the outlet connections. It could be an issue with an intermittent control board, but it is most likely a power supply connection problem. Let me know what you find.



Thank You I will get back to you tomorrow.
Back to top
Appliance Ninja  
#6 Posted : Tuesday, November 19, 2013 7:03:22 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Sounds good, thank you! Have a great day!
Back to top
Users browsing this topic
Similar Topics
Flashing 12:00 (Oven Repair (including Ranges and Cooktops))
by Sarah Gifford 11/13/2013 6:56:04 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET