2 Pages<12 Go to Page...

GE washer not spinning out all the water Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GTWN5050M0WS	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

Appliance Ninja		#11 Posted : Sunday, November 17, 2013 10:25:27 AM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		That was very helpful, thank you. There was no pause, meaning the control is not seeing any errors. If you unplug the machine for about 10 minutes and try a spin cycle with the fastest spin speed selected, does it ramp up to fast speed?
User Profile View All Posts by User View Thanks

sbryant73		#12 Posted : Sunday, November 17, 2013 11:43:17 AM(UTC)
Rank: Member Groups: Registered Joined: 11/16/2013(UTC) Posts: 10		I unplugged it for 10 minutes and tried the spin cycle again, it does not seem any different. It speeds up around the 50 sec mark on the video and then seems to slow back down a little. Also makes a few banging noises once in awhile. https://www.youtube.com/watch?v=Q9WZ1hEMAxw
User Profile View All Posts by User View Thanks

Appliance Ninja		#13 Posted : Sunday, November 17, 2013 2:43:01 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		Is that clicking coming from the area behind the motor, like near the bottom of the large pulley area?
User Profile View All Posts by User View Thanks

sbryant73		#14 Posted : Sunday, November 17, 2013 3:16:44 PM(UTC)
Rank: Member Groups: Registered Joined: 11/16/2013(UTC) Posts: 10		It sounds like the clicking is coming from around there.
User Profile View All Posts by User View Thanks

Appliance Ninja		#15 Posted : Sunday, November 17, 2013 3:59:28 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		I suspect the mode shifter assembly is experiencing trouble and will probably need to be replaced. The correct one for your model is available at the link below. GE WH38X10017 Shaft & Mode Shifter Asm - AppliancePartsPros.com
User Profile View All Posts by User View Thanks

sbryant73		#16 Posted : Monday, November 18, 2013 1:03:02 PM(UTC)
Rank: Member Groups: Registered Joined: 11/16/2013(UTC) Posts: 10		Is this something that is fairly easy to install?
User Profile View All Posts by User View Thanks

Appliance Ninja		#17 Posted : Monday, November 18, 2013 1:57:44 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		The video below shows how this is done. How to replace the mode shifter on a GE Hydrowave - YouTube
User Profile View All Posts by User View Thanks

sbryant73		#18 Posted : Monday, November 18, 2013 2:10:34 PM(UTC)
Rank: Member Groups: Registered Joined: 11/16/2013(UTC) Posts: 10		Thank you very much for your time and help.
User Profile View All Posts by User View Thanks

Appliance Ninja		#19 Posted : Monday, November 18, 2013 2:15:26 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		You are very welcome. Let me know how it goes! Have a great week!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest

2 Pages<12 Go to Page...