Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

4 Pages<1234>
Options
Go to last post Go to first unread
czechaman  
#21 Posted : Tuesday, May 21, 2013 7:13:52 PM(UTC)
czechaman

Rank: Member

Groups: Registered
Joined: 5/20/2013(UTC)
Posts: 6

News, I replaced the motor which had a thermistol connected to it. Also, the new circuit board was installed easily. (6 hours ;)
The temp plummeted to 10 below zero after 3 hours, then started climbing upward after. Now it is 10 degrees above zero!!
What is going on!! please assist!
richappy  
#22 Posted : Wednesday, May 22, 2013 12:13:44 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Did you follow the directions with the new board and clip the thermistor wire going to the board?
czechaman  
#23 Posted : Monday, October 14, 2013 5:22:26 AM(UTC)
czechaman

Rank: Member

Groups: Registered
Joined: 5/20/2013(UTC)
Posts: 6

Originally Posted by: smithwatson Go to Quoted Post
Great information. Thanks for sharing. One question to ask, Can one repair the motors and motherboards at home without seeking any professional help from Heating repair professionals and HVAC certified professionals?

I did it all by myself, and youtube, and constant prayer. I did not know if I was going to get it all back together or not. But yes it was done with mentioned above and about 5 minute conversation with the man I bought the motor from.
God Bless.
mikebrassil  
#24 Posted : Wednesday, October 23, 2013 8:12:41 AM(UTC)
mikebrassil

Rank: Member

Groups: Registered
Joined: 6/11/2013(UTC)
Posts: 1

I think a lot of times the DIY'ers are not given enough credit. Got to remember a lot of DIY'ers maybe in similar trades as us and are able to read and understand our diagrams just fine and for the ones who can't we are more then happy to help.

Our appliance repair forum is a community of both tradesman and DIY'ers, people helping people.
Precis  
#25 Posted : Sunday, November 17, 2013 7:30:11 AM(UTC)
Precis

Rank: Member

Groups: Registered
Joined: 11/17/2013(UTC)
Posts: 3

Is this info only for GE, or are there any other nameplates that it is relevant for?
ssauer40  
#26 Posted : Monday, February 24, 2014 6:05:49 PM(UTC)
ssauer40

Rank: Member

Groups: Registered
Joined: 11/13/2012(UTC)
Posts: 13

Boy, my evaporator coil was all iced up too, replace the heater element and thermostat, ended up being the motherboard. It was controlled electronically. All working fine now.
Dean Haustead  
#27 Posted : Sunday, August 28, 2016 10:24:36 PM(UTC)
Dean Haustead

Rank: Member

Groups: Registered
Joined: 6/13/2016(UTC)
Posts: 72

If anybody has re-oiled a motor and found it did not harm the board, please let me identify. I have ample of used board and will use one the after that time I see a breakdown, but without a test process am unwilling to use a used motor in a customer's fridge. Imagine a present check of the winding attainment the square wave might be a high-quality test.
Dean Haustead  
#28 Posted : Sunday, August 28, 2016 10:32:40 PM(UTC)
Dean Haustead

Rank: Member

Groups: Registered
Joined: 6/13/2016(UTC)
Posts: 72

When my refrigerator do not work very well then I contact my dealer and they replacing my GE refrigerator evaporator motors and motherboards.
Dean Haustead  
#29 Posted : Thursday, September 1, 2016 9:25:48 PM(UTC)
Dean Haustead

Rank: Member

Groups: Registered
Joined: 6/13/2016(UTC)
Posts: 72

GE started creation electronic refrigerators, which have one motherboard that controls all functions of the refrigerator. The motherboard controls all so, hypothetically everything that fails on a GE electronic refrigerator can be cause by the motherboard. The deception is to decide if the trouble is the board or a little else. With the cost of these boards there is no require to replace one unnecessarily. Under are some symptoms that are usually caused by a faulty motherboard on these type of refrigerators.
Dean Haustead  
#30 Posted : Thursday, September 1, 2016 9:26:19 PM(UTC)
Dean Haustead

Rank: Member

Groups: Registered
Joined: 6/13/2016(UTC)
Posts: 72

GE started creation electronic refrigerators, which have one motherboard that controls all functions of the refrigerator. The motherboard controls all so, hypothetically everything that fails on a GE electronic refrigerator can be cause by the motherboard. The deception is to decide if the trouble is the board or a little else. With the cost of these boards there is no require to replace one unnecessarily. Under are some symptoms that are usually caused by a faulty motherboard on these type of refrigerators.
Users browsing this topic
Guest (6)
4 Pages<1234>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.